EV Charging Range - myenergi zappi, Sync Energy, Hager, GARO and Suntree EV chargers

EV Charging Range

Home and workplace EV chargers from myenergi zappi, Sync Energy, Hager, GARO and Suntree — 7kW single-phase to 22kW three-phase, tethered or socketed Type 2 — plus charging cables, CT clamps, solar add-ons and the protection and test kit to finish the install.

Tethered or Socketed, 7kW to 22kW

Every charger in this range is an AC wall charger with a Type 2 connection. Single-phase models deliver 7kW to 7.4kW for homes; 22kW models need a three-phase supply for workplaces and fleets. Choose tethered for a fixed cable that's always ready, or socketed for a neater install where drivers plug in their own Type 2 cable.

  • ― Tethered ― fixed Type 2 lead, 6.5m to 7.5m depending on model
  • ― Socketed ― Type 2 socket, used with a Type 2 Mode 3 cable
  • ― Built-in PEN fault protection on selected zappi, Sync Energy and GARO models ― check each listing
  • ― Claiming a grant? Check the exact model is on the scheme's approved list before you buy
Tethered and socketed EV chargers, 7kW to 22kW

myenergi zappi ― Solar-Ready Smart Charging

zappi chargers can charge your car from surplus solar using Eco and Eco+ modes, or at full power in Fast mode. The range runs from the compact zappi GLO to 22kW three-phase units, all managed through the myenergi app.

  • ― zappi GLO 7kW: 6.5m tethered Type 2, RFID tap-to-charge for up to 126 users, IP65
  • ― zappi v2.1 7kW: built-in PEN fault protection, Wi-Fi and Ethernet, built-in vHub
  • ― zappi 22kW three-phase: tethered (6.5m) or untethered Type 2 socket
  • ― Add a harvi wireless sensor or CT clamp for grid and solar monitoring
The zappi GLO 7kW single phase tethered smart EV charger

myenergi zappi Chargers

7kW single-phase and 22kW three-phase, tethered and untethered.

View all EV chargers

myenergi

zappi GLO 7kW Tethered EV Charger

The compact zappi, managed entirely from the myenergi app.

  • 7kW single-phase with a 6.5m tethered Type 2 cable
  • RFID tap-to-charge with up to 126 users, plus Wi-Fi and Bluetooth
  • Integrated 6mA DC fault protection and tamper detection, IP65 for permanent outdoor use
ZAPPI3AS07T-G Stock status: In stock

Net price: €512.50

Gross price: €630.37

zappi GLO 7kW smart EV charger

Sync Energy ― Tethered & Socketed Wall Chargers

The BG Sync EV range from Sync Energy covers 7.4kW single-phase chargers in tethered and socketed versions, up to a 22kW three-phase socketed unit, with monitoring and control through the Sync Energy app.

  • ― 7.4kW tethered with 7.5m cable, Wi-Fi and built-in 30mA Type A RCD
  • ― 7.4kW Wall Charger 2 socketed, CT clamp supplied for load management, Type A RCD with 6mA DC detection
  • ― 4G, Wi-Fi, LAN and OCPP 1.6J versions with integrated open PEN protection
  • ― 22kW three-phase socketed with RFID and integrated Type A RCD
BG SyncEV 7.4kW Tethered EV Charger WiFi

Sync Energy Chargers

Single-phase 7.4kW and three-phase 22kW, tethered and socketed.

sync energy

BG Sync EV 7.4kW Tethered Charger

A 7.4kW home charger with app control and no earth rod required.

  • 7.4kW (32A) with a 7.5m tethered Type 2 cable
  • 2.4GHz Wi-Fi with Sync Energy app control
  • Built-in 30mA Type A RCD, 3-year warranty
EVWC2T7G02 Stock status: In stock

Net price: €394.19

Gross price: €484.85

BG SyncEV 7.4kW Tethered EV Charger WiFi

Hager Witty One ― Built for Load Management

Hager's Witty One is a 7kW single-phase charging station rated IP55 and IK10, with load management capability. Choose the tethered version with a 6.5m Type 2S cable, or the socketed version with an integrated CT for Monta load management.

  • ― 7kW, 32A, 220-240V single-phase
  • ― IP55 and IK10, -25 to 50°C operating temperature
  • ― Wall mounted, 370 x 250 x 150mm
XVU107CCT-MO

Hager Witty One

GARO & Suntree 7kW Tethered Chargers

Single-phase chargers with 7.5m tethered Type 2 leads. The GARO GEV7.4L adds dynamic load management, PEN fault detection, Wi-Fi and LAN; the Suntree SWJ3E is IP65 with Type A + 6mA DC protection, in black or grey.

EV Charging Cables

A 22kW Type 2 Mode 3 cable for socketed chargers, and a 10m Mode 2 cable with an in-line control box for charging from a 13A socket.

Load Management & Solar Add-ons

CT clamps measure current without breaking into the circuit. The myenergi harvi is a wireless, battery-free sensor for zappi and eddi, and the eddi diverts surplus solar to a heating load of up to 3.68kW.

Circuit Protection & Testing

32A B-curve, 30mA Type A single-module RCBOs from Hager and GARO, and the Megger EVX100 adaptor for automated Mode 3 charge point testing with the MFT-X1. Always follow the charger manufacturer's requirements for circuit protection.

Choosing the Right Charger

On a single-phase supply, a 7kW to 7.4kW charger is the one to choose; 22kW chargers need a three-phase supply to reach full output. If you have solar, a zappi or a charger with solar integration can make use of surplus generation, and CT clamps or a harvi let the charger see what the house is using. If you’re claiming a grant, check the exact model is on the scheme’s approved list, and remember that the charger must be installed and certified by a registered electrician. Everything here is stocked, in-branch and online, at Electrical Wholesaler.