EPH RFR V2 RF room thermostat with boost button

Photo is representative

EPH RFR V2 RF Room Thermostat with Boost Button 5-35°C Battery

Product Information

Stock Code RFR
GTIN 5391515070813
Stock status: Out of stock

priced individually

Net price: €72.36

Gross price

€89.00

Branch Stock

Monaghan

Stock status: Out of stock
Open · Closes 6:00 PM
Address & hours
Monaghan, Plantation Road, Co. Monaghan, H18 E781, Ireland
+353 47 81135
Mon – Thu
8:00 AM – 6:00 PM
Fri
8:00 AM – 5:00 PM
Sat
9:00 AM – 1:00 PM
Sun
Closed

Cavan

Stock status: Out of stock
Open · Closes 6:00 PM
Address & hours
Cavan, Unit 7, Kilmore Business Park, Dublin Road, Co. Cavan, H12 PV48, Ireland
+353 49 4365190
Mon – Thu
8:00 AM – 6:00 PM
Fri
8:00 AM – 5:00 PM
Sat
9:00 AM – 1:00 PM
Sun
Closed

Carrickmacross

Stock status: 1 in stock
Open · Closes 6:00 PM
Address & hours
Carrickmacross, Ardee Rd, Co. Monaghan, A81 Y573, Ireland
+353 42 9663322
Mon – Thu
8:00 AM – 6:00 PM
Fri
8:00 AM – 5:00 PM
Sat
9:00 AM – 1:00 PM
Sun
Closed

The EPH RFR V2 is a battery-powered RF room thermostat with a boost button, for wireless zone control of heating systems. This is the V2 model. EPH’s installation guide covers pairing with the R17-RFV2, R27-RFV2, R37-RFV2 and R47-RFV2 programmers and the UFH10-RF underfloor heating controller. Original (V1) EPH RF programmers such as the R27-RF are not covered by EPH’s V2 pairing instructions, so check the model on your existing programmer before ordering. The boost button applies a 30 minute, 1, 2 or 3 hour boost, and the keypad can be locked. Setpoint range is 5 to 35°C with an NTC 100K sensor, powered by 2 x AAA alkaline batteries. Dimensions 80 x 80 x 25.7mm; stand included.

Specifications

Model

RFR V2 (RFRV2)

Compatible Receivers

EPH V2: R17-RFV2, R27-RFV2, R37-RFV2, R47-RFV2, UFH10-RF (per EPH guide)

V1 Programmers

Not covered by EPH's V2 pairing instructions (e.g. R27-RF)

Dimensions

80 x 80 x 25.7mm

Power Supply

2 x AAA Alkaline Batteries

Power Consumption

50 uA

Temperature Sensor

NTC 100K Ohm @ 25 deg C

Battery Replacement

Once a year

Temp. Control Range

5 - 35 deg C

Boost

30 min, 1, 2 or 3 hours

Documents

datasheet RFR Datasheet

EPH Controls