DESCRIPTION

• Insulating material group: I
• Maximum power dissipation for nominal condition: 4.73 W
• Maximum load current: 150 A (with 50 mm² conductor cross section)
• Nominal current IN: 150 A
• Nominal voltage UN: 1000 V
• Open side panel: No
• Shock protection test specification: DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection: guaranteed
• Finger protection: guaranteed
• Result of surge voltage test: Test passed
• Result of power-frequency withstand voltage test: Test passed
• Power frequency withstand voltage setpoint: 2.2 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection): Test passed
• Result of flexion and pull-out test: Test passed
• Bending test rotation speed: 10 rpm
• Bending test turns: 135
• Tensile test result: Test passed
• Result of tight fit on support: Test passed
• Tight fit on carrier: NS 32/NS 35
• Setpoint: 10 N
• Result of voltage-drop test: Test passed
• Result of temperature-rise test: Test passed
• Requirement temperature-rise test: Increase in temperature ≤ 45 K
• Short circuit stability result: Test passed
• Conductor cross section short circuit testing: 50 mm²
• Short-time current: 6 kA
• Result of thermal test: Test passed
• Proof of thermal characteristics (needle flame) effective duration: 30 s
• Relative insulation material temperature index (Elec., UL 746 B): 130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 130 °C
• Static insulating material application in cold: -60 °C
• Surface flammability NFPA 130 (ASTM E 162): passed
• Specific optical density of smoke NFPA 130 (ASTM E 662): passed
• Calorimetric heat release NFPA 130 (ASTM E 1354): 28 MJ/kg
• Smoke gas toxicity NFPA 130 (SMP 800C): passed
• Fire protection for rail vehicles (DIN EN 45545-2): R22 HL 1 - HL 3
• Bending test conductor cross section/weight:
  • 25 mm² / 4.5 kg
  • 50 mm² / 9.5 kg