DESCRIPTION

• Rated surge voltage: 8 kV
• Degree of pollution: 3
• Overvoltage category: III
• Insulating material group: I
• Maximum power dissipation for nominal condition: 0.77 W
• Maximum load current: 28 A (with 4 mm² conductor cross section, rigid)
• Nominal current IN: 24 A (at 2.5 mm²)
• Nominal voltage UN: 800 V
• Open side panel: Yes
• Shock protection test specification: DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection: guaranteed
• Finger protection: guaranteed
• Result of surge voltage test: Test passed
• Result of power-frequency withstand voltage test: Test passed
• Power frequency withstand voltage setpoint: 2 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection): Test passed
• Result of flexion and pull-out test: Test passed
• Bending test rotation speed: 10 rpm
• Bending test turns: 135
• Bending test conductor cross section/weight:
• 0.14 mm² / 0.2 kg
• 2.5 mm² / 0.7 kg
• Tensile test result: Test passed
• Result of tight fit on support: Test passed
• Tight fit on carrier: NS 35
• Setpoint: 1 N
• Result of voltage-drop test: Test passed
• Result of temperature-rise test: Test passed
• Requirement temperature-rise test: Increase in temperature ≤ 45 K
• Short circuit stability result: Test passed
• Conductor cross section short circuit testing: 2.5 mm²
• Short-time current: 0.3 kA
• Conductor cross section short circuit testing: 4 mm²
• Short-time current: 0.48 kA
• Result of thermal test: Test passed
• Proof of thermal characteristics (needle flame) effective duration: 30 s