Sort by:

Solar iBoost+ System CA-20/15

PRODUCT CODE: CA2015
In stock
Solar iBoost+ System CA-20/15 - Automatically Consumes Excess Energy (Rather than export it to the grid from your solar inverter)
1 day
€ 397.59

DESCRIPTION

Solar iBoost+ System CA-20/15 

Solar iBoost+ enables you to automatically consume the excess energy generated at your home so you can just sit back and enjoy the extra savings! Read on to find out how with Solar iBoost+ fitted you wil:

Cut the cost of water heating in your home.

Reduce the use of your boiler. 

Maximise the use of the free solar energy generated at your property.

How it Works!

Just a single clamp continuously monitors the household's unused PV energy. Solar iBoost+ diverts the equivalent energy to the immersion to heat water instead of feeding it to the grid. Once the tank is hot any surplus energy is redirected to another immersion or resistive load.

This is the principle of how it operates:
The Solar iBoost+ system detects when excess energy is being exported to the grid and measures it. The main unit receives this information from the Sender and releases the equivalent level of energy (less a small reserve) to the immersion heater.
As the exported levels adjust in line with home consumption the Solar iBoost+ adjusts the levels delivered for water heating ensuring that only excess energy is used.

  1. Using just a single clamp installed at the household meter the Sender transmits vital export energy information to the Solar iBoost+ wirelessly
  2. Solar iBoost+ is activated when excess energy is available. It intelligently controls and adjusts the flow of energy to the immersion in proportion with the fluctuating export levels.
  3. Water is heated over the course of the day using the free solar energy at your home.


There Are 2 Key Parts To Solar iBoost+:

  • The Solar iBoost+ Controller
    (Typically installed in the airing cupboard / hotpress next to the immersion.)
  • The Solar iBoost+ Sender & Clamp
    (A “Sender” and “Clamp” located at the main electricity meter at the house/building.)

About The Solar iBoost+ Controller
Solar iBoost+ modulates grid power to the immersion heater down to the same levels of those being exported, enabling you to automatically capture more of the PV or wind turbine energy generated to heat hot water for free.

About The Solar iBoost+ Sender & Clamp
The Sender is attached to a clamp which is placed around the household electrical live input.  Rather cleverly it both detects when energy is flowing to the grid and monitors the levels of that export. The Sender transmits this information wirelessly to the Solar iBoost+’s built in receiver where the information is processed and water heating is activated and controlled.

Sender
The Sender is battery operated as standard so you don’t need to find a socket nearby. This means that it can easily be located next to the household meter.(image attached)
Clamp:
The clamp is simply fastened around the correct cable and so is considerably less complicated than systems where wired connections to the household meter or consumer unit are necessary. We keep it simple and it saves time too. (image attached)


Is my home suitable for a Solar iBoost+?

  • I have on-site power generation. (Solar PV and wind are most common).
  • The distance between the water tank and utility meter is less than 30m.Energy usage in the household is less than the energy generated and excess is exported to the grid.
  • I would like to reduce my energy bills, especially for expensive water heating.

Please view the link to hear more about Solariboost 
https://www.youtube.com/watch?v=R1IviyaEqLw

In this Box:
Solar iBoost+
Sender & Clamp
Wall fixing screws
Batteries



ENERGY SAVING